humebeam I have to thank you so much for this Icarus-Design. This case (880gr PLA NX2 white, Extrudr.. the gooey hell of PLA, but so goddam sexy matte) for the famous game Tippi Tree by Devon Montes would have taken almost 4 days to print on standard profile Qidi X Max. With the Icarus Upgrade I was able to print the whole thing with 100mm/sec in 1day, 18hours in a more than decent quality
Beiträge von Iatraliptes
-
-
Love my first PC FR Icarus, the new fanduct printed without any problems… Now on to my white PC FR parts for my Voron 0.1 😎
-
Can you do a fire test with it - and I would also be intrested where to get it if it is flame retardend. Just lighten a piece of filament with a torch and check if it stopps burning itself or if it continous... The Priline looks nice easy to print but is to weak for a fan duct. The Polymax FR is good and seems to work longterm but I like matt finish more.
Same for me: love the matte look!
-
I was right in the process of printing my PC version of the Icarus.. but now I rather wait for the upgraded fanduct... 🥳 Where did you geht the Prusament PC CF from? On prusa's site it's always out of stock 😭
-
Der Weg zu Polycarbonat ist lang und steinig… 🤯 Langsam wird‘s… Olaf Krause Irgendwelche generellen Tipps?
Bin bei 255Grad Nozzle, 105Grad Bett, Fan auf 50% ab Layer 4 (Überhänge werden da viiiiel besser), schwarze Seite Qidi Platte (Magigoo PC) ohne Probleme, 40mm/sec, Flow 96%, Kammer landet bei 60Grad, Retract reduziert auf 0,6mm, Linienbreite bis zu 0,75mm (nach diesem Foreneintrag, alleine wäre ich nicht drauf gekommen…), Support ab 60Grad…
-
humebeam one question.. is there a series of X-Max‘es without screw holes? I didn‘t find a location to mount your cable holder.. 🤷🏻♂️
-
That looks awesome. Prusament PC Blend?
I built my first Icarus with Extrudr GreenTec Pro in black, unfortunately the GreenTec Pro can withstand high temperatures, but is quite soft, and material creep under constant load led to a loosening of the bearings in the carrier. Also, the mount for the Dragon got softer and softer (see pics) and the fan duct melted on the right side (very curious about the fix in the new fan duct ).. That's why I didn't try to print in PC yet. To prevent a complete stop of production ('til now, I only have the X-Max, Voron 0 will begin to build next month I hope) I quickly printed the new version in Extudr ASA neon orange (narrow version fits perfectly). Up to now, everything works fine, the 40x40 fan is a true relief for my ears Next step will be an Icarus made out of PolyMax PC FR..
-
Download the Automatic Ribbon Cable Holder here:
An I thought I was finished modifying my Max by printing the fanduct 1.10 today...