Posts by BTCB

As a part of my project to port over the Qidi X-Plus to my TronXY X5SA, I couldn't find the OEM corner mounting brackets anywhere (I searched VERY hard on the interwebs). Qidi was nice enough to send me 4 brackets where I measured thoroughly with my digital calipers and designed it onOnShape.

The slight differences here are the structure rafts on each side are no longer there, and the 10mm linear rod spot being a few mm off (1.5 vs 2mm OEM). The mounting holes are now 5mm bolts, rather than the 2mm bolts. I've included the 2mm bolt version if you prefer.

Note: The 2mm bolt version requires threaded inserts.

If you enjoy this build, please consider downloading, liking, and following for future updates.

Print: PETG, 30%

Qidi X-Plus X-Max corner mounting bracket by BTCB | Download free STL model | Printables.com

Corner bracket for the Linear Gantry Rods | Download free 3D printable STL models

www.printables.com

Olaf,

Hope you enjoy and can share among your community

Qidi X-Plus X-Max corner mounting bracket by BTCB | Download free STL model | Printables.com

Corner bracket for the Linear Gantry Rods | Download free 3D printable STL models

www.printables.com

Hello Olaf!

I was able to get my hands on the corner mounts from Qidi, and I was able to reproduce the model in OnShape. I intend on releasing that soon

I wish you good health my friend!

Thank you for the quick responses.

Would you be willing to take photos or dimensions of it for me? I'd be more than happy to build it myself

Hello and good day to you all,

May I please ask if you have the following item:

https://www.elektrifiziert.net/index.php?attachment/5152-2022-03-12-20h18-29-png

(Corner mounts)

I have been researching for the dimension for some time now and I am looking for an STL file, or a STEP file, or any other type of file that I can print for quite some time now. I am committing to a project with my TronXY X5SA, and would like to essentially port these on over to all 4 corners.

Thank you for your time.
I've translated this to German for your convenience.
================

Hallo und guten Tag euch allen,

Darf ich fragen, ob Sie den folgenden Artikel haben:

https://www.elektrifiziert.net/index.php?attachment/5152-2022-03-12-20h18-29-png/&thumbnail=1

(Eckhalterungen)

Ich habe schon seit einiger Zeit nach der Dimension gesucht und suche seit einiger Zeit nach einer STL-Datei, einer STEP-Datei oder einem anderen Dateityp, den ich drucken kann. Ich habe mich gerade auf ein Projekt mit meinem TronXY X5SA eingelassen und möchte diese im Wesentlichen auf alle 4 Ecken übertragen.

Vielen Dank für Ihre Zeit.

Ich habe dies für Ihre Bequemlichkeit ins Deutsche übersetzt.