OK, ich habs:
Man muss "sudo crontab -e" eingeben. Sonst wird das in die crontab von pi eingetragen, was bei mir nicht funktioniert.
OK, ich habs:
Man muss "sudo crontab -e" eingeben. Sonst wird das in die crontab von pi eingetragen, was bei mir nicht funktioniert.
Hallo,
ich habe mir kürzlich einen Qidi X-Plus zugelegt und wollte diesen über socat mit meinem Octopi verbinden. Leider geht das bei mir nicht.
Weder mit der Anpassung über /etc/rc.local noch über crontab. Socat scheint richtig installiert zu sein, da ich die Interfaces in /dev/pts finde.
pi@octopi:/dev/pts $ ls -al
total 0
drwxr-xr-x 2 root root 0 Feb 14 2019 .
drwxr-xr-x 19 root root 3840 May 10 20:46 ..
crw--w---- 1 root tty 136, 0 May 10 20:46 0
crw--w---- 1 pi tty 136, 1 May 10 20:46 1
crw--w---- 1 pi tty 136, 2 May 10 20:46 2
crw--w---- 1 root tty 136, 3 May 10 20:46 3
crw--w---- 1 pi tty 136, 4 May 10 20:47 4
c--------- 1 root root 5, 2 Feb 14 2019 ptmx
Richte ich nun /dev/pts/1 in Octoprint ein und versuche eine Verbindung zu etablieren, gibt es eine Fehlermeldung:
Changing monitoring state from "Offline" to "Opening serial connection"
Connecting to port /dev/pts/1, baudrate 115200
Changing monitoring state from "Opening serial connection" to "Connecting"
Connected to: Serial<id=0xb28b1b30, open=True>(port='/dev/pts/1', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
No answer from the printer within the connection timeout, trying another hello
Send: N0 M110 N0*125
There was a timeout while trying to connect to the printer
Changing monitoring state from "Connecting" to "Offline"
Connection closed, closing down monitor
Habt Ihr einen Tipp für mich?
Weitere Daten:
Firmware-Version: X-plus v4.2.6.5
Raspi 4B
Beide Geräte über einen Switch verbunden und darüber an eine Fritzbox.